CA-T Series-Heavy-Duty Rear Loading Computer Beam Saw
Models: CA-12T, CA-15T
- Max. saw projection 150 mm
- Book height: 18 mm x 7 sheets / 15 mm x 8 sheets
- High throughput capability
- Reliable and easy operation
- Higher energy savings
| Model | CA-12T | CA-15T |
|---|---|---|
| Max. Saw Projection | 150 mm | 150 mm |
| Max. Length of cut | 3750 mm | 4500 mm |
| Sawblade Motor | 25 HP | 25 HP |
| Saw Carriage Motor | 3 HP | 3 HP |
| Pusher Motor | 1.5 KW | 1.5 KW |
| Pusher Speed | 0~60 M/min | 0~60 M/min |
| Saw Carriage Speed | 0~100 M/min | 0~100 M/min |
| Air Pressure Requirement | 7~8 kg/cm2 | 7~8 kg/cm2 |
| Air consumption | 35~40 l /min | 35~40 l /min |
| Vacuum Cleaner Requirement | 55~60 m3/sec | 55~60 m3/sec |
| Vacuum Speed | 25 m/sec | 25 m/sec |
| Main Sawblade Dia. (Arbor) | 18" / 20" (d50) | 18" / 20" (d50) |
| Scoring Sawblade Dia. (Arbor) | 205 mm (d50) | 205 mm (d50) |
| Air Cushion Table | 600 x 1800 mm x 4 sets | 600 x 1800 mm x 4 sets |
| Model | CA-12T | CA-15T |
|---|---|---|
| A | 6700 | 7450 |
| B | 7300 | 8100 |
| C | 4100 | 4850 |
FAQ
- Which models are available in the CA-T Series?
- CYTEK's CA-T Series has two models, CA-12T and CA-15T, both with 150 mm maximum saw projection; maximum cutting length is 3750 mm and 4500 mm, with a 25 HP blade motor.
- Which CYTEK machine has the largest cutting capacity?
- The CA-T Series is CYTEK's largest-capacity machine: 150 mm maximum saw projection (a book of seven 18 mm or eight 15 mm panels) and up to 4500 mm cutting length on the CA-15T, a heavy-duty rear-loading computer beam saw.
- What is the daily output of the CA-T Series?
- CYTEK's CA-T Series produces 670-720 panels per day and suits high-volume professional furniture factories.
- What is rear loading, and why does it help?
- Rear loading feeds the whole stack into the saw from a lift table behind the machine, so the operator does not handle full stacks at the front: less manual load and shorter loading time. CYTEK's CA-T Series uses a heavy-duty screw lift table.
- What options are available for the CA-T Series?
- Options on CYTEK's CA-T Series include quick blade-change spindles (type 1 screw-type, type 2 pneumatic) and an air-float worktable on the main body. Standard features include the heavy-duty screw lift table, rack-and-pinion drive, precision linear guides and the high-efficiency dust-extraction pressure beam.